| 提交询价信息 |
| 发布紧急求购 |
价格:电议
所在地:广东 深圳市
型号:EAB-110
更新时间:2018-07-08
浏览次数:1392
公司地址:深圳市龙岗区深圳市坂田街道五和大道永香路华熠科技大厦B1008
![]()
秦经理(先生) 经理
深圳市美孚科技有限公司经销批发的数字存储示波器、频谱分析仪、数字电桥LCR、台式万用表、安规测试仪、音频测试仪、视频制式测试仪、电子负载、电能质量分析仪、电参数测试仪、电池测试仪、LED光谱仪器、电源测试仪、其他仪器仪表畅销消费者市场,在消费者当中享有较高的地位,公司与多家零售商和代理商建立了长期稳定的合作关系。深圳市美孚科技有限公司经销的数字存储示波器、频谱分析仪、数字电桥LCR、台式万用表、安规测试仪、音频测试仪、视频制式测试仪、电子负载、电能质量分析仪、电参数测试仪、电池测试仪、LED光谱仪器、电源测试仪、其他仪器仪表品种齐全、价格合理。深圳市美孚科技有限公司实力雄厚,重信用、守合同、保证产品质量,以多品种经营特色和薄利多销的原则,赢得了广大客户的信任。
深圳市美孚科技有限公司本着互利发展、资源共享、服务第一的原则,依托广东珠江三角洲巨大的市场,辐射全国。深圳市美孚科技有限公司专注与完善的(仪器配套方案)(解决方案)(技术支持)高性能、高品质、高效率的全程式服务跟踪。代理国内外品牌厂商多达20多家,多年来不懈努力的为客户服务!主营产品、示波器、频谱仪、信号发生器、音频测试仪、安规测试仪、数字电桥、功率计、AC/DC变频电源、万用表、钳形表、电流探头等各类仪器仪表!主营品牌:美国安捷伦-AGILENT、美国泰克-Tektronix、美国福禄克-FLUKE、日本横河-YOKOGAWA、菊水-KIKUSUI、日本德仕-TEXIO、日置-HIOKI、共立-KYORITSU、台湾固纬-GWINSTEK、台湾华仪-EXTECH、台湾艾德克斯-ITECH、杭州远方-EVERINE、同惠、优利德、北京普源、安泰信等仪器。
本公司的(仪器配套方案)(解决方案)(技术支持)承载这客户的考验!如果您需要本公司的支持、请第一时间联系我们的客服。我们将竭诚为阁下服务!
在互联网迅猛发展的今天,本公司将放眼世界,利用互联网这个强有力的信息工具,将我们的品牌再次提升,让美孚科技仪器仪表公司更好地为广大用户服。公司理念:秉承坦诚、公道求新、务实、和气生财之经营理念,以“诚信服务”为公司之宗旨。公司将不懈致力于客户之需求.....
输出容量 : 1KVA - 6KVA
内建主动式输入功率因子改善线路 (PF ≥ 0.97),且输入电压全范围 90 - 264V,符合CE认证
可多台电源并联或接成三相输出,满足客户容量扩充或三相输出的应用 (选配
全范围可调输出
电压及频率设定范围 (0 - 300V,40 -1000HZ)
大型的 240 X 64 Graphic LCD 显示器
在阻性负载下波形失真小于 1%
输出波峰因子比,于满电流的输出状态下可达 3 : 1
瞬时反应快,在瞬间加重载或除载时波形可于400ms内恢复
全范围输出电压的稳压率可达 0.5%
可程式 50 个记忆组;内含 9 测试步骤,记忆组及步骤可单独设定循环,记忆组间亦可连结测试以仿真各种负载的电源特性
可执行自动循环测试,zui高可执行 999900 次
针对被测物的寿命试验,可依需求设定以秒、分、时为测试执行时间单位
特殊的恒流装置,可轻易启动马达、压缩机等高启动电流之负载
高启动负载能力,浪涌电流可达额定电流的 4 倍,并可维持1000mS不切断保护
可设定当加载电流超过上限电流设定值时;维持设定值电流恒定输出 (反应时间 < 1400mSec)
选配远程遥控输入界面,可执行 Test / Reset 及 7 组记忆组 (M1 - M7) 快速输出
内建PLC遥控输出界面
输出过电流、短路、过电压、过功率、过温度及逆灌电流保护及警报
前面板输入软件校正
针对IEC61000 - 4 - 11标准的应用,可设定启始角,电压暂降 (Dips),瞬断及电压变化
测试中可以透过飞梭旋纽 (Rotary Knob) 实时的调整显示中的电压 / 频率输出
可选购GPIB,及RS232 & USB界面
具有交流 (AC)、直流 (DC) 可程式输出模式,一台抵两台满足客户的测试应用
可量测电压、频率、电流 (RMS&Peak)、实功率、视在功率、虚功率、电流波峰及功率因子
|
Opt.612 PLC Remote I/P Interface |
||
|
Opt.627 GPIB Interface Card |
||
|
Opt.643 USB & RS232 PC Control Card |
||
|
Opt.647 Ethernet Card |
||
|
Opt.642 Parallel & Multiphase |
EAB Modular Programmable AC Power Source
| MODEL | EAB-110 | EAB-120 | EAB-140 | EAB-160 | ||
|---|---|---|---|---|---|---|
| INPUT | ||||||
| Phase | 1Ø | 1Ø or 3Ø | ||||
| Voltage | 100V - 240V±10% | 200V - 240V±10% | 1Ø / 3Ø3W: 200V - 240V±10% 3Ø4W: 346V - 416V±10% |
|||
| Frequency | 47 - 63Hz | |||||
| Max. Current | 15 | 30 | 30 | 1Ø:4 3Ø3W:26A 3Ø4W:1 |
||
| Power Factor | 0.97 | |||||
| AC OUTPUT | ||||||
| Max Power | 1000VA | 2000VA | 4000VA | 6000VA | ||
| Max Current 1Ø (r.m.s)*1 | 0-150V | 9.2 A | 18.4 A | 36.8 A | 55.2 A | |
| 0-300V | 4.6 A | 9.2 A | 18.4 A | 27.6A | ||
| Inrush Current (peak) | 0-150V | 36.8A | 73.6A | 147.2A | 220.8A | |
| 0-300V | 18.4A | 36.8A | 73.6A | 110.4A | ||
| Phase | 1Ø, ( |
|||||
| Total Harmonic Distortion (THD) | <0.5% (Resistive Load) at 40.0 - 70.0Hz and output voltage within the 80 - 140Vac at Low Range or the 160 - 280Vac at High Range <1% (Resistive Load) at 70.1 - 500Hz and output voltage within the 80 - 140Vac at Low Range or the 160 - 280Vac at High Range <1% (Resistive Load) at 501 - 1000Hz and output voltage within the 100 - 140Vac at Low Range or the 160 - 280Vac at High Range |
|||||
| Crest Factor | ≧3 | |||||
| Line Regulation | ± 0.1 V | |||||
| Load Regulation | ± (1% of output +1V) at Resistive Load | |||||
| Response Time | < 400 µsec | |||||
| SETTINGS | ||||||
| Voltage | Range | 5 - 300V, 150 / 300V Auto Range | ||||
| Resolution | 0.1V | |||||
| Accuracy | ±(1% of setting + 2counts) | ±(1% of setting + 5counts) | ||||
| Frequency | Range | 40 - 1000Hz Full Range Adjust | ||||
| Resolution | 0.1Hz at 40.0 - 99.9Hz, 1Hz at 100 - 1000Hz | |||||
| Accuracy | ±0.03% of setting | |||||
| Starting & Ending Phase Angle |
Range | 0-359∘ | ||||
| Resolution | 1∘ | |||||
| Accuracy | ±1∘(45 - 65HZ) | |||||
| DC OUTPUT | ||||||
| Max Power | 1000W | 2000W | 4000W | 6000W | ||
| Max Current | 0-210V | 4.8A | 9.6A | 19.2A | 28.8A | |
| 0-420V | 2.4A | 4.8A | 9.6A | 14.4A | ||
| Ripple & Noise (rms) | Range | L | < 500mV | < 700mV | ||
| H | < 800mV | < 1100mV | ||||
| Ripple & Noise (p-p) | < 3.0Vp-p | < 4.0Vp-p | ||||
| SETTINGS | ||||||
| Voltage | Range | 0 - 210V / 0 - 420V Selectable | 0-210V / 0-420V Selectable >5V | |||
| Resolution | 0.1V | |||||
| Accuracy | ± (1% of setting + 2 counts) | ± (1% of setting + 5 counts) | ||||
| Current Hi Limit (OC Fold=OFF) OC Fold Back (OC Fold = ON) |
Range | L | 0.01 - 4.80A | 0.01 - 9.60A | 0.10 - 19.20A | 0.10 - 28.80A |
| H | 0.01 - 2.40A | 0.01 - 4.80A | 0.10 - 9.60A | 0.10 - 14.40A | ||
| Resolution | 0.01 Amps | |||||
| Accuracy | ± (2.0% of setting + 2counts) | |||||
| MEASUREMENT | ||||||
| Voltage | Range | 0 - 210V / 0 - 420V | 0 - 210V / 0 - 420V Selectable >5V | |||
| Resolution | 0.1 V | |||||
| Accuracy | ± (1% of reading + 2counts) | ± (1% of reading + 5counts) > 5 V | ||||
| Frequency | Range | 0.0 - 1000 Hz | ||||
| Resolution | 0.1 Hz | |||||
| Accuracy | ±0.1Hz (501 - 1000Hz Accuracy ± 0.2Hz) | |||||
| Current (AC & DC) | Range | L | 0.005 A - 1.200 A | 0.005 A - 2.400 A | - | - |
| H | 1.00 A - 13.00 A | 2.00 A - 26.00 A | 0.05 A - 52.00 A | 0.05 A - 78.00 A | ||
| Resolution | L | 0.001A | - | - | ||
| H | 0.01A | |||||
| Accuracy | L | ± (1% of reading + 5counts) | ||||
| H | ± (1% of reading + 5 counts) | |||||
| Current Peak | Range | 0.0A - 38.0 A | 0.0 A - 76.0 A | 0.0 A - 152.0 A | 0.0 A - 228.0A | |
| Resolution | 0.1 A | |||||
| Accuracy | ± (1% of reading + 5 counts) | |||||
| Power (AC) | Range | L | 0.0 W - 120 W | 0.0 W - 240 W | - | - |
| H | 100 W - 1300 W | 200 W - 2600 W | 0 W - 5200 W | 0 W - 7800 W | ||
| Resolution | L | 0.1W | - | - | ||
| H | 1W | |||||
| Accuracy | L | ± (2% of reading + 15counts ) at PF > 0.2 | - | |||
| H | ± (2% of reading + 5counts ) at PF > 0.2 | ± (2% of reading + 10counts ) at PF > 0.2 | ||||
| Power (DC) | Range | L | 0.0 W - 120 W | 0.0 W - 240 W | - | - |
| H | 100 W - 1300 W | 200 W - 2600 W | 0 W - 5200 W | 0 W - 7800 W | ||
| Resolution | L | 0.1W | - | - | ||
| H | 1W | |||||
| Accuracy | L | ± (2% of reading +5counts) | ||||
| H | ± (2% of reading +5counts) | |||||
| Power Apparent (VA) | Range | L | 0.0VA - 120.0VA | 0.0VA - 240.0VA | - | - |
| H | 100VA - 1300VA | 200VA - 2600VA | 0VA - 5200VA | 0VA - 7800VA | ||
| Resolution | L | 0.1VA | - | - | ||
| H | 1VA | |||||
| Accuracy | V×A ,Calculated value | |||||
| Power Resistive (Q) | Range | L | 0.0VAR~120.0VAR | 0.0VAR~240.0VAR | - | - |
| H | 0VAR~1300VAR | 0VAR~2600VAR | 0VAR~5200VAR | 0VAR~7800VAR | ||
| Resolution | L | 0.1VAR | - | - | ||
| H | 1VAR | |||||
| Accuracy | ,Calculated value |
|||||
| Power Factor | Range | 0.000-1.000 | ||||
| Resolution | 0.001 | |||||
| Accuracy | W/VA, Calculated and displayed to three significant digits | |||||
| Crest Factor | Range | 0 to 10.00 | ||||
| Resolution | 0.01 | |||||
| Accuracy | Apeak / Arms, Calculated and displayed to two significant digits | |||||
| GENERAL | ||||||
| Transient (only for 40 - 70Hz) | Trans-Volt:0.0 - 300.0V, Resolution: 0.1V Trans-Site:0.0 - 25.0mS, Resolution: 0.1mS Trans-Time:0.5 - 999.9mS, Resolution: 0.1mS Trans-Cycle:0 - 9999, 0-Constant |
|||||
| Inrush Current | 4 times current rating | |||||
| Enhanced Over Load Capacity | Over current 110% can hold for 1000 ms without protection | |||||
| Operation Key Feature | Soft key, Numeric key, Rotary Knob | |||||
| Remote Input Signal (Option) | Test, Reset, Recall program memory 1 through 7 | |||||
| Remote Output Signal | Pass, Fail, Test-in-Process | |||||
| Calibration | Front Panel Calibration | |||||
| Key Lock | Yes, Password Driven | |||||
| Synch Output Signal | ON / Event / OFF, Output Signal 5V ,BNC type | |||||
| Alarm Volume Setting | Range: 0 - 9; 0=OFF, 1 is softest volume, 9 is loudest volume | |||||
| Graphic Display | 240 x 64 dot resolution Monographic LCD / Contrast 9 Levels 1-9 | |||||
| Interface (Option) | Ethernet, USB / RS232, GPIB, |
|||||
| Protection Circuits | OCP, OVP, OPP, OTP, RCP (Over Current, Over Voltage, Over Power, Over Temp) | |||||
| Fan | Temperature Control | |||||
| Rear Output | Terminal Block (L,N, G, Ls, Ns) | |||||
| Rack mount Handles | Yes | |||||
| PFC | PF≥ 0.97 at Full load | |||||
| Effieciency | ≥75% (at Full load) | ≥80% (at Full load) | ||||
| Auto loop cycle | 0=Continuous, OFF, 2~9999 | |||||
| Over Current Fold Back | On/Off , Setting On when output current over setting Hi-A value it will fold back output voltage to keep constant output current is setting Hi-A value | |||||
| CE Mark | Yes | |||||
| Parallel Output for 1Ø Output | Yes | |||||
| Yes | ||||||
| Operation Environment | 0 - 40ºC / 20 - 80% RH | |||||
| Dimension, mm*2 | W | 430 | 430 | 430 | 430 | |
| H | 133.5 (148) | 133.5 (148) | 267 (281) | 400.5 (473) | ||
| D | 530 | 530 | 530 | 530 | ||
| Net Weight | 20Kg | 21Kg | 40Kg | 53Kg | ||
| *1 At working voltage 110V / 220V | ||||||
| *2 Figure in parentheses are maximum values | *product specifications are subject to change without notice. | |||||
免责声明:以上所展示的[EAB-110 EAB-110交流变频电源]信息由会员[深圳市美孚科技有限公司]自行提供,内容的真实性、准确性和合法性由发布会员负责。