| 提交询价信息 |
| 发布紧急求购 |
价格：电议
所在地：上海
型号：
更新时间：2024-03-19
浏览次数：2067
公司地址：临夏路256号上海电子商城5号楼904室
丁成峰(先生) 经理
美国Extec公司抛光悬浮液
EXTEC Polishing Suspensions for every application, including ginal polishing, high and low pH polishing, high and low removal polishing, alpha and gamma polishing, agglomerated and de-agglomerated polishing, polishing of soft and hard materials and composites.
A specially formulated blended permanent suspension of 0.05 µm Aluminum Oxide and Silicon Dioxide particles with a pH of 9. Recommended for final polishing of cobalt-based alloys, nickel-based alloys, steels, tool steels, electronics, printed circuit boards.
A specially formulated permanent suspension of 0.06 µm Aluminum Oxide particles with a LOW (4 pH) aqueous base for final polishing. Recommended for material that responds well in a low pH environment, alumina, ceramics, plastics, electronics.
A specially formulated permanent suspension of 0.06 µm Silicon Dioxide particles with a HIGH (10 pH) aqueous base for final polishing. Recommended when a high pH is needed for aluminum, brass, copper, lead-based alloys, precious metals, titanium, other nonferrous materials.
A specially formulated Aluminum Oxide (Al2O3) general purpose permanent suspension that provides a high removal rate for most materials.
Alpha and gamma polishing powders for superior polished sample surfaces. Available in 0.03, 0.05 and 1.0 micron grades.
Levigated available in 2.0, 5.0 and 10.0 micron grades.
De-agglomerated alpha and de-agglomerated gamma polishing permanent suspensions. Available in 0.03, 0.5 and 1.0 micron grades.
Available in 0.06 µm and 0.02 µm particle size. Recommended for composites, silicon nitride, cobalt-based alloys, nickel-based alloys, steels, tool steels, electronics and printed circuit boards.
1.0 µm; Recommended as the final polish for glass and other soft materials.
1.0 µm and .0.5 µm; Recommended for samples that cannot be exposed to Aluminum Oxide Contamination.
免责声明：以上所展示的[ 抛光悬浮液]信息由会员[上海益朗仪器有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
