| 提交询价信息 |
| 发布紧急求购 |
价格:电议
所在地:上海
型号:9
更新时间:2020-03-26
浏览次数:1016
公司地址:上海市嘉定区阿克苏路大卫国际大厦701
![]()
杨宁(先生)
SVPI型 超级闪蒸器(Super VPI)
一.应用范围
YunTek 超级闪蒸器适用于带压力液体样品进入分析仪器进行分析的前端气化以及样品传输。其设计与性能与同种产品相比有一定。
YunTek Super VPI is suitable for front-end gasification and sample transfer with pressure liquid samples entering the analysis instrument for analysis. Its design and performance have certain advantages compared with the same kind of domestic products.
本产品适用于下述分析前的样品处理:
This product is suitable for sample processing prior to the following analysis:
1. 各类工业用烯烃中微量一氧化碳、二氧化碳的分析,配合气相色谱仪使用。Analysis of trace amounts of carbon mo
2. 液态烃组成分析,配合气相色谱仪使用。
Analysis of the composition of liquid hydrocarbons, used in co
3. 其他组分分析,如烃类中硫化物分析。
Other compo
二.仪器特点
1.本仪器相比一般的液体进样阀更加方便,而且分析结果更加。
This instrument is more co
2.所有液样品均在恒压环境中被汽化和传输,克服了液态样品在气化过程中,由于其密度变化而导致的错误,确保了分析谱图出峰良好。
All liquid samples are vaporized and transmitted in a co
3.全程传输管线具有可调伴热功能,保证样品不会冷凝。
The whole transmission pipeline has adjustable thermal function to ensure that the sample does not condense.
4.可以实现液体和气体样品的进样
Sampling of liquid and gas samples can be achieved
5.高样品通量
High sample flux
6.系统自带吹扫功能,减少交叉污染
The system has its own cleaning function to reduce cross-co
三.产品
1.全程惰性化管路及惰性化处理过滤器,杜腐蚀、吸附。
The whole process of inert pipeline and inert treatment filter, to prevent corrosion, adsorption.
2.可用于硫化物及氧化物的痕量物质检测。
Trace substances that can be used for the detection of sulfides and oxides.
3.具备压力控制功能,使每次进样压力一致,保证分析效果。
Has the pressure accurate co
4.设计带有用户可调式加热器两个,分别对闪蒸温度 及进样管路进行温度控制,实现全程伴热,防止样品气化后二次冷凝。
Two user-adjustable heaters are designed to co
5.经闪蒸后样品,进行重复进样分析,分析结果相对标准偏差大控制在 0.5%,优于同类产品。
After the flash steam sample, repeated sample analysis, the analysis results relative to the standard deviation of the maximum co
四.技术参数
项目
参数
产品货号Product number
YXY01702
高进样压力 Maximum liquid pressure(已修改)
闪蒸器可根据特殊要求进行定制,用于承受高约 70 barg 的液体进样压力
高气化温度 Maximum gasification temperature
200℃
温控精度 Temperature co
±0.1℃
标准液体进样压力 Standard liquid injection pressure
40 barg
仪器 RSD% Instrument RSD %
≤0.5%
外观尺寸 Dimensions
W x D x H= 254x500
重量 weight
11 公斤
供电power supply
220V / 50Hz
控制管路 Co
全程钝化管路,杜吸附、腐蚀,全程伴热管路,杜二次冷凝
五.应用分析
石化客户样品组分以液态碳四为主,理论上液态样品热水浴气化进样存在挥发不完全的问题,挥发性组分的重现性较差(重烃组分重复性很差,甚至大于 50%)。实际数据也验证了,客户直接气态进样数据重复性很差,即使用国产品牌闪蒸器,由于使用了过大的传输管路,导致样品不能够被完全气化,进而会导致样品分析结果的不完整以及其它错误,亦存在重烃组分挥发不充分或二次冷凝的现象。通过闪蒸进样的硫化物分析结果谱图中,羰基硫组分峰面积相对标准偏差低于 0.5%,保证了分析结果的重复性。证明了 YunTek 闪蒸器对硫化物组分的进果。
Petrochemical customers 'sample compo
六.系统需求
1.分析仪器需安装气体进样阀
A gas sample valve on the analyzer interface.
2.分析仪器需具备外部连接端口
The analytical instrument needs an external co
七.用户服务热线
鋆昕仪器科技(上海)有限公司
地址:上海市嘉定区阿克苏路1187号大卫大厦701室
:(86)
:(86)
邮箱:
网址:
免责声明:以上所展示的[9 石化闪蒸仪 气相色谱辅助进样 汽化完全 重烃样品]信息由会员[鋆昕仪器科技(上海)有限公司]自行提供,内容的真实性、准确性和合法性由发布会员负责。