| 提交询价信息 |
| 发布紧急求购 |
血液溶浆机安装说明：
本机安装无特殊要求，操作简单方便。打开包装箱，取出本机，置放平稳。（立式机请将移动轮锁紧）将随机配置的电源线一端插入机器后部的电源插孔，
另一端插入交流220V/10A的电源插座上。电源插座上应有保护接地装置。打开电源开关，准备往水箱内注水。此时由于水箱内是空的无水，低水位灯亮并
通过水箱注水口向水箱注水。（打开仪器上面黑色小盖），当水箱注满后，上水位灯亮表示水已注满，请立即停止注水（请注意观察仪器右边有溢水口，
一旦有溢水立刻停止加水），此时机器自动启动水箱预加热。
1、在仪器运转时你掀开隔水膜袋观察水污染情况，根据水的质量情况确定您是否需要换水，如使用纯净水会延迟您换水的时间。
2、水箱内的水进行消毒时从加水口处放入为0.5/100的氯片即可。
3、水箱清洗时，在设备右侧有放水口，您将水箱内的水全部放掉，然后关死放水阀门，从加水口再加入清水并加入2片消毒片（氯气）开动设备运行10分钟，
沉淀20分钟再把水放掉，以上步骤重复2次即可。
Installation instructions of blood plasma dissolving machine:
The machine is installed without special requirements, easy to operate. Open the packing box, take out the machine and place it smoothly. (for vertical machine, please lock the moving wheel tightly) insert one end of the randomly co
Plug the other end into an ac 220V/10A power outlet. There should be protective earthing device on the power socket. Turn on the power switch and prepare to fill the water tank. At this time because the water tank is empty without water, low water level light and
Fill the tank with water through the water inlet. (open the small black cover on the instrument). When the water tank is full, the upper water level light will light up to indicate that the water is full. Please stop the water filling immediately.
o
Blood plasma machine maintenance and maintenance:
1. When the instrument is in operation, you can open the waterproof membrane bag to observe the water pollution and determine whether you need to change water according to the water quality. If you use purified water, it will delay the time of changing water.
2. When the water in the water tank is disinfected, add 0.5/100 chlorine tablets from the water inlet.
3. When cleaning the water tank, there is a water outlet on the right side of the equipment. You should drain all the water in the water tank and then close the water discharge valve.
Precipitate for 20 minutes and then drain off the water. Repeat the above steps twice.
血液溶浆机厂家直销，欢迎广大客户来电咨询订购！
免责声明：以上所展示的[ 长沙巴跃血液溶浆机]信息由会员[上海乔跃实有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
