CPA500-4530G CPCI电源 宽温 6U550W交流输入

西安泰达华芯科技发展有限公司坐落于西安市雁塔区。公司成立以来，精英团队坚持创业、创新、创的理念，广纳社会人才促进了公司高速发展。公司主要业务是为军工，电力，铁路，医疗提供高可靠的电源解决方案和高品质的电源产品。

我公司和美国BPS电源公司有着紧密的合作关系，我们能提供包括前端的一次电源到二次电源等完整的电源解决方案，提供的产品功率密度大，效率高，可靠性高，特别适合恶劣环境下，要求体积小又要提供大功率的场合下适用。我们能提供的电源包括微功率的1w到上万瓦，电源安装方式从板载的到机柜式的应有尽有。电压输入范围广，适合各种应用场合。特别是对于Compact PCI power和VPX系列产品,有大量的成功案例及合适产品。值得一提的是我公司提供的 3U 250W CPCI电源 CPA250-4530G和6U 600W CPCI电源CPA500-4530G广泛应用在国内的铁路，军工，电力和医疗行业，得到了行业内高度的认可和赞誉。

公司积极整合社会优质资源，在化视野、化资源、化研发、化市场等方面积累了充足的经验和实力，拥有了畅通的渠道和多样的产品。

CPA550-4530G是一款高可靠的6U 550Wcpci电源，支持冗余，并联扩容，支持热插拔。能在特别恶劣的环境下工作。

The CPA and CPD Series are highly reliable power supplies for CompactPCIundefinedreg; systems, which are increasingly used in communications, industrial, military, aerospace, and other applications. These power supplies offer high power density in plug-in modules that meet the requirements of the PICMGundefinedreg; power interface specification for CompactPCIundefinedreg; systems. The converters use the patented EDGETM technology and provide important advantages such as flexible output power, extremely high efficiency, excellent reliability, full input-tooutput isolation, negligible inrush current, hot-swap capability, soft start, and overtemperature protection.
The input is protected by a transient suppressor (varistor) against surges and transients occurring on the source lines and cover an operating input voltage range from either 90 to 264 VAC or 36 to 75 VDC.
The outputs are protected against continuous overload, open-circuit, and short-circuit. Full n+1 redundant operating mode is made possible by integrated ORing FETs or ORing diodes. When several converters are connected in parallel, a single-wire connection between converters ensures proper current sharing.
The converters are designed with two or three separate forward converters with fixed switching frequency and synchronous rectifiers at their output.
LEDs on the front panel and various warning signals display the status of the converter. The aluminum case acts as a heat sink and as an RFI shield. It is designed for vertical insertion into 19" rack systems, but it can also be mounted in any other position, as long as the necessary airflow is ensured. The connector is a 47 pin type from Positronic or similar.
Several options are available to meet different requirements.

详细技术资料 请参考技术指标书！