| 提交询价信息 |
| 发布紧急求购 |
价格：电议
所在地：上海
型号：VacuLINE
更新时间：2014-12-31
浏览次数：823
公司地址：上海市徐汇区漕宝路80号D座
陈小姐(女士) 行政
| Easy to install and use | Connects to main power and compressed air. |
| Fast treatment times | High power impact enables treatment times from 20-180 seconds depending on materials. |
| Standard or customised chambers | Chamber size can be designed to most applications. |
| Process gas | Process gasses such as oxygen and argon can be used, but in most cases it is not necessary. |
| Process control | Entire plasma process is controlled by the HV-X generator and PLC unit. All parameters are displayed on the touch panel. (Standard – Proface). |
| Cost efficient surface treatment | Due to the low power and no need of special treatment gasses, the unit is a very cost efficient solution for improving surface wettability and adhesion. |
| Vacuum pressure plasma | Enables treatment of both conductive and non-conductive surfaces. |
| Works in fully automated lines | Integrates easily into robot cells or existing transportation lines. |
|
Technical Specifications |
VacuLINE |
|
Mains voltage and frequency |
3 x 400 VAC + 0 |
|
Plasma power |
0 – 6000 Watt |
|
Power supply |
HV-X plasma generator series |
|
Compressed air inlet |
5-6 bar dry and clean |
|
Process gas |
Standard: air. On request: Oxygen, argon and nitrogen |
|
Vacuum pump capacity in m3/min. |
15 to 240 m3/min., depending on size of vacuum chamber |
|
Vacuum level |
1-4 mbar |
|
Evacuation time, typical |
15-60 seconds, depending on chamber size and pump capacity |
|
Plasma treatment time, typical |
20-180 seconds, depending on material |
|
Control and connectivity |
Complete with touch panel. (Standard – Proface) |
|
Regulation compliance |
CE – RoHs – WEEE |
免责声明：以上所展示的[VacuLINE 丹麦Tantec公司]信息由会员[必和国际贸易（香港）有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
