HY-HPC211 摩托车不透光烟度计

分体式结构设计，操作方便，按新国标GBl9758-2005技术要求研制；
采用内置全流式取样技术，专用测量摩托车急加速、怠速工况时的烟度；
高亮度数码显示，进口关键零部件组装而成；
采用全流式耐高温的特殊取样探头，采样稳定、、方便；
开机预热时间10分钟，并自动调零；
数据自动线性化处理，可显示不透光度N、光吸收系数K；
出现故障时自动显示故障代码；
附有自动时钟显示，内置打印机(RS—232或模拟接口联网)供选择。

主要技术参数：

测量范围      不透光度N:  0～

              光吸收系数K:0～90.65m-1

示值误差      ≤±2%

稳定性        自动校零，量矩漂移≤±1%/4h

分辨率        0.1%

响应时间      1S±0.1S

输 输出方式      LED(4位)显示，可附打印机，打印出5组急加速烟度、怠速烟度、光

                吸收系数的zui大值及平均值，测试时间、日期等，可附接口与计算机

                联网

环环境条件      温度0～40℃，相对湿度≤90%

电电源          AC100-240V   50/60Hz 消耗功率150VA

外外形尺寸      控制单元：250mm(长)×310mm(宽)×170mm(高)

                测量单元：350mm(长)×260mm(宽)×170mm(高)

重重量          控制单元：4kg，

                测量单元：5kg

Main Features:

◆Separated structural design, easy to operate, according to the new national standard GBl9758-2005 technical requirements for development.
◆With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
◆High-brightness digital display, import key components assembled.
◆Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
◆Ji machine warm-up time 10 minutes, and automatic zero adjustment.
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
◆Fails automatically displays fault code.
◆With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.

Main technical parameters:

Test Scope：No light transmission N: 0～

Light absorption coefficient K: 0～90.65 m^-1
Shows the value error：≤ ± 2%
Stability：Automatic zero, volume moments drift ≤ ± 1% / 4h
Resolution：0.1%
Response Time：1S ± 0.1S
Output Mode：LED (4-bit) display can be attached to the printer 5 groups hard phases   

of acceleration smoke, idle smoke, the light absorption coefficient of

the maximum and the average test time, date, etc., can be attached to

interface with the computer network
Environmental conditions：Temperature -5 ~ 50 ℃, relative humidity ≤ 90%
Power：AC100-240V  50/60Hz Power consumption 150VA
Dimensions：Control Box::：240mm (L) × 310mm (W) × 170mm (H)
                     Flue Box：350mm (L) × 260mm (W) × 170mm (H)
Weight：Control box: 4kg, flue box: 5kg