ERICHSEN 435S ERICHSEN 435S附着力测试仪

ERICHSEN 435S附着力测试仪Method of OperationAfter checking the tight fixing of the test body at theend of the load trans

珠海天创仪器有限公司是专业从事仪器仪表设备代理、销售与服务工作的高科技企业。天创仪器致力于把国外的先进高科技产品在国内迅速推广与应用，与国外著名仪器仪表生产厂商有着广泛的技术与销售合作的良好基础，并作为美国泛美、美国雷泰、美国福禄克、德国K.K、德国EPK、德国仪力信、德国菲希尔、德国德图、日本美能达、日本日置、英国易高等公司的中国销售代理商。

天创仪器拥有一支年轻有为、朝气蓬勃的领导班子及技术人员，秉承“讲诚信、重服务”的经营理念，以“一切为了客户，为了客户的一切”为宗旨，致力于国家仪器仪表产业的发展，同时愿意与仪器仪表相关技术领域中的相关人员、机构与企业进行各种形式合作！同时也竭诚欢迎国内、外客商前来洽谈业务，愿与您精诚合作，共创辉煌未来！

ERICHSEN 435S附着力测试仪

Method of Operation
After checking the tight fixing of the test body at the
end of the load transmission bolt, the required force
is adjusted on the scale using the locking screw
slider. Then the Model 435 S is placed
perpendicularly onto the surface to be tested resp.
beside the applied raised coating to be tested, and is
pressed down so that the guide wheels touch the
surface. In this way the preset force acting upon the
test disc is fully effective on the test surface. The
instrument is now moved into the rolling direction the
wheels over the specimen to be tested e.g. against,
for example, scale lines.

As the diameter of the test head of Model 435 S is
considerably smaller compared with the steel disc of
Model 435, a central sector of the disc of Model 435
has been chosen as test body for reasons of space
saving. The test body is mounted on a bolt and is
preloaded by an internal helical spring to a force
adjustable from 0 to 20 N. When placing Model 435 S
with the two guide wheel perpendicularly onto the
surface, the rigidly arrested test body acts (with the
preset force) upon the surface. The test force can be
varied – as for Model 435 – by means of 3
exchangeable springs covering three different test
ranges.

本页产品地址：http://www.geilan.com/sell/show-401983.html