MVME167P-24SE MVME167P-24SE

CPC16200CPCI-6020

CPCI-7145CPCI-7200

AMC Storage Modules

AMC-S302 - 80GB SATA Extended Duty
AMC-S320 - 80GB SATA Extreme Duty
AMC-S402 - 146/300GB SAS Enterprise Duty
AMC-S502 - 32GB SATA Solid State
AMC-S602 - 160GB (Dual 80GB) SATA Extreme Duty
More

 
AMC-9210: AdvancedMC Module

AMC.0 R2.0 mid-size and full-size AdvancedMC module
Cavium Networks high performance OCTEON Plus CN58xx family of packet processors
4x GbE (AMC.2) plus x4 PCI Express (AMC.1) to carrier
4x GbE small form factor plug-in (SFP) interfaces on front panel
More

 
AMC-S301: Advanced Mezzanine Card (AMC) drive carrier

AMC-S301 80GB Disk Module
80GB SATA drive in a full-size AMC module
Supports both port 2 and port 3 via switch or IPMI setting
Extended duty drive for 24/7 50% duty cycle operation
More

 
PrAMC-6201: Full Size Advanced Mezzanine Card

PowerPC MPC7448 processor running up to 1.4 GHz core frequency and 1MB L2 cache
MV64460 Marvell Discovery III system controller
167 MHz MPX bus
Memory configurations possible up to 2GB with ECC support
More

PrAMC-6210 Full or Mid, Single AdvancedMC Module

Designed to the PICMG® AdvancedMC specification
Full and mid AdvancedMC form factor
Freescale MPC8641D PowerPC microprocessor
Dual core processor capable of symmetric or asymmetric multiprocessing
More

PrAMC-7210/7211 AMC Processor Module

Intel® Core™ 2 Duo processor core with 4MB L2 cache, running at 1.5 GHz
667 MHz frontside bus, connecting processor and Intel 3100 chipset
Up to 4GB DDR-400 memory with ECC support
MontaVista CGL or Wind River PNE Linux operating environment combined with Basic Blade Services compliant to the SA Forum hardware platform interface (HPI) layer
More

 
KSI8560 PowerQUICC III based AdvancedMC Module

AMC (PICMG® Advanced Mezzanine Card Base Specification) with up to 8 software selectable E1/T1/J1 interfaces
Freescale Semiconductor MPC8560 PowerQUICC III integrated communications processor
Up to 256 MB Double Data Rate (DDR) SDRAM with Error-correcting Code (ECC)
4 MB boot flash with redundancy, and up to 1 GB user flash
More
ATCA-7105, ATCA-7107 Processor Blade

High performance processor blade with four PMC sites
1.8 GHz Intel® Pentium® M processor
Intel E7501 server-class chipset supporting 4.3GB/s memory bandwidth
2GB and 4GB versions available
More

ATCA-7140 Dual-Core Processor Blade

High performance processor blade with SMP support
Two Dual-Core Intel® Xeon® (2.13 GHz) LV processors
Multiple software packages including operating system
PICMG 3.0 Gigabit Ethernet base interface support
More

ATCA-7150

High performance processor blade with SMP support
Two, Dual-Core Intel® Xeon™ (2.13 GHz) LV processors
Multiple software packages including operating system
PICMG 3.0 Gigabit Ethernet base interface support
More

ATCA-7221 Processor Blade

High performance processor blade with SMP support
Dual 2.8 GHz Intel Xeon LV processors
PICMG 3.0 Gigabit Ethernet base interface support
PICMG 3.1, Option 1 and 2 fabric interface support
More

 
ATCA-7301

2.16 GHz Intel® Core™ 2 Duo processors
On-board 24-port Gigabit Ethernet switch
Two mid size AdvancedMC™ sites
AMC.0, AMC.1 and AMC.2 compliant
More

ATCA-7350

High performance processor blade with SMP support
Two, Quad-Core Intel® Xeon® (2.13 GHz) LV processors
Up to 32GB main memory
Multiple software packages including operating system
More

ATCA-9301 Many-Core Processor Blade

Two Cavium OCTEON 5860 processors with sixteen 900 MHz MIPS64 cores each for high bandwidth packet processing applications
Hardware acceleration with thread pinning, security, de-/compression, regexp, packet queuing, and scheduling functions
10-port Gigabit Ethernet rear transition module network interfaces
Designed to deliver telco-grade reliability
More

 
ATCA-9305 Many-Core Processor Blade

Two Cavium OCTEON 16-core CN5860 processors operating up to 900 MHz
Freescale MPC8548 PowerQuicc III integrated communications processor operating at 1 GHz
Hardware acceleration with thread pinning, security, de-/compression, regexp, packet queuing and scheduling functions
Broadcom BCM56802 10 Gigabit Ethernet (GbE) multilayer switch
More

 
ATCA-C121 10 Gigabit ATCA AMC Carrier Blade

Modular design – four full height, single wide AdvancedMC™ (AMC) sites
Enables scalable and distributed computing
Mixed data plane and control application on the same blade
On-board service processor
More

ATCA-S110 Storage Blade

SCSI based AdvancedTCA storage blade
PICMG 3.0 compliant
Single-slot storage solution
300GB and 600GB capacity versions
More

 
ATCA-S120 Storage Blade

ATCA storage blade with four (4) mid-size AMC slots
Additional storage via RTM mounted HDDs
Up to 876GB of storage on a single blade
SAS and SATA media support
More

 
ATCA-S201 Storage Blade

ATCA storage blade with four (4) mid-size AMC slots
Additional storage via RTM mounted hard disk drives (HDDs)
Up to 876GB of storage per blade/RTM combination
Hardware-based RAID 0, 1 and 1EiSCSI target and NAS file sharing
More

 
KatanaQP Processor Blades

Single or Dual PowerPC™ MPC7448 processors running at up to 1.4GHz
2-Way SMP Architecture
ATCA PICMG 3.1 Node (1000Base-T Base interface + Octal High Speed GbE Fabric iterface)
Layer 2/3 Ethernet switch option
More

 
KatanaPPB Processor Blades

Up to six PowerPPC 7448 processors
- Dual Freescale® PowerPC™ 7448 processors running up to 1GHz on the baseboard
- Up to four Freescale PowerPC 7448 processors running up to 1GHz on four modules
ATCA PICMG® 3.1 Option 3
Up to 1GB DDR SDRAM with ECC in SO-DIMM package on the baseboard and up to 512MB DDR SDRAM on each processor module
128MB of flash memory on the baseboard and total of 256MB of flash memory on four modules
More

 
Katana 2000 Commercial ATCA Bladed Server

3U, 19" dual nn server platform based on ATCA technology for high performance, high reliability computing
Supplied with one  or two server blades each with two quad-core Intel® Xeon® 5500 series processor
Front-to-rear cooling to meet ASHRAE and IT best practice requirements
Support for power saving features enhancing energy efficiency
More

 
Centellis 2000

3U, 19" chassis with two horizontal blade slots
Scalable reliability for central office and data center environments
Front-to-rear cooling
Fault-resilient design; front maintenance and rear cabling
More

 
Centellis 3406

14-slot, 19" (3406) and 16-slot, 23” (3600) 12.5U form factor
Modular computing via AMC technology
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
More

 
Centellis 3600

Fully integrated and validated AdvancedTCA system platform
16-slot, 23 AdvancedTCA shelf
Small footprint, 12.5 U form factor
Redundant shelf management, fan trays and power entry modules
More
 
Centellis 4440

Best-in-class thermal characteristics
Fabric interface bandwidth options for 1/10/40GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.4 thermal compliance
More
 
Centellis 4410

High performance features at entry-level price points
Fabric interface bandwidth options for 1/10GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.3 thermal compliance
More
 
Centellis 4620

14-slot, 19” (4420) and 16-slot, 23” (4620) 13U form factor
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
Combined switch/control blades to maximize billable application slots
More
 
Centellis 31KX High Availability Platform

ATCA shelf to deliver 5NINES availability into central office environments
13U/19” chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More

 
Centellis 4100 High Availability Platform

ATCA shelf to deliver 5NINES availability into central office environments
13U/19" chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More

Centellis 2000

3U, 19" chassis with two horizontal blade slots
Scalable reliability for central office and data center environments
Front-to-rear cooling
Fault-resilient design; front maintenance and rear cabling
More

 
Centellis 3406

14-slot, 19" (3406) and 16-slot, 23” (3600) 12.5U form factor
Modular computing via AMC technology
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
More

Centellis 3600

14-slot, 19" (3406) and 16-slot, 23” (3600) 12.5U form factor
Modular computing via AMC technology
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
More

 
Centellis 4440

Best-in-class thermal characteristics
Fabric interface bandwidth options for 1/10/40GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.4 thermal compliance
More
 
Centellis 4410

High performance features at entry-level price points
Fabric interface bandwidth options for 1/10GbE
14-slot, 13U, 19" form factor
Designed for CP-TA B.3 thermal compliance
More

Centellis 4620

14-slot, 19” (4420) and 16-slot, 23” (4620) 13U form factor
Verified shelf-level thermals and PICMG standards compliance
Redundant PICMG 3.0 & 3.1 base/fabric switching blades
Combined switch/control blades to maximize billable application slots
More

Centellis 31KX High Availability Platform

ATCA shelf to deliver 5NINES availability into central office environments
13U/19” chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More

Centellis 4100 High Availability Platform

ATCA shelf to deliver 5NINES availability into central office environments
13U/19" chassis with 14 vertical blade slots
Front maintenance and rear cabling
Fault-resilient design to minimize hardware induced failures
More

MicroTCA
 
Centellis 500 MicroTCA Platform

Low profile, lightweight, solidly constructed injection molded plastic table-top or shelf placement chassis is easily transportable
Three (3) available AMC midsize expansion payload slots for application customization
Best-in-class MicroTCA Carrier Hub (MCH) and Intel Core 2 Duo processor AMC (PrAMC-7211)
Dynamic cooling for low noise enterprise deployment
More
 
Centellis 1000 MicroTCA System Platform

11-slot MicroTCA shelf provides scalable, embedded communications computing system
19 in. (483 mm) wide, 7 in. (178 mm) high, 9.3 in. (237 mm) deep shelf with front-only I/O and 23 in. rack mount option
600 watt AC or -48 VDC power entry modules support full complement of AdvancedMCs
Redundant DC power entry modules, hot-swappable AdvancedMCs, and an easy-to-service design
More

Katana 2000 Commercial ATCA Bladed Server

3U, 19" dual nn server platform based on ATCA technology for high performance, high reliability computing
Supplied with one  or two server blades each with two quad-core Intel® Xeon® 5500 series processor
Front-to-rear cooling to meet ASHRAE and IT best practice requirements
Support for power saving features enhancing energy efficiency
More

CPCI6200 PICMG 2.0/2.16 Processor Board

1.3 or 1.5 GHz Freescale MPC8572 dual core integrated processornn Integrated north bridge in the processor (no frontside bus)
2GB or 4GB ECC-protected DDR3-800
Four on-board Gigabit Ethernet interfaces Two serial ports
One USB 2.0 port Support for PICMG 2.16 CompactPCI Packet Switching Backplane specification
More

 
CPCI7200 PICMG 2.0/2.16 Processor Board

1.06 or 1.5 GHz Intel Core2 Duo processor
533  or 667 MHz front side bus
Intel® E7520 + 6300ESB dual channel 3.2GB/s memory controller
2GB ECC-protected DDR2-400
More

 
CPCI7145 PICMG 2.16 Processor Board

1.8 GHz Intel Pentium M processor
400 MHz frontside bus
Intel® E7501 dual channel 3.2GB/s memory controller
2GB ECC-protected DDR SDRAM
More

 
CPCI7147 PICMG 2.16 Processor Board

1.4 GHz Intel Pentium M processor
400 MHz frontside bus
Intel® 855GME 1.6GB/s memory controller
2GB ECC-protected DDR SDRAM
More

 
CPCI6190 Universal-Mode Processor Board

PowerPC 750GX processor with core frequency of 1 GHz and 1MB L2 cache
Discovery GT-64260 system controller
Sentinel universal-mode PCI-to-PCI bridge
Up to 1GB high speed SDRAM main memory
More

 
Katana752i Real-Time Processing Blade

PowerPC 750GX processor running at up to 1GHz
cPSB Node (PICMG 2.16, Dual 1000 BaseT)
cPCI peripheral functionality
Dual PMC / PTMC expansion sites
More
 
CPCI-6020 Host Slot Processor Board

'MPC7410 PowerPC processor
High-performance L2 cache
High-performance, low-latency SDRAM subsystem
Up to 2GB of ECC protected capacity
More

 
CPCI-6065 CPCI Processor Board with the PowerPlus II Architecture

MPC7410 or MPC750 class processor
1MB or 2MB of L2 cache
Up to 1.5GB ECC SDRAM, with optional RAM500 memory expansion modules
Dual 10/100BaseTX Ethernet interface
More

 
CPCI-6115 Peripheral Slot Compute Board

Up to 1.0 GHz MPC7457 PowerPC processor with AltiVec technology for peak performance
Up to 2GB DDR ECC memory for peak computation power
Dual Gigabit Ethernet PICMG 2.16 interface connectivity
Additional Gigabit Ethernet interfaces for increased connectivity
More

 
CPCI7070 with the Intel Pentium III Processor Board

CompactPCI® host slot processor board
Intel® Pentium® III BGA2 processor
Intel® 440GX chipset
100 MHz frontside bus frequency
More

 
CPCI-8200 CPCI Board with Multiple T1/E1 Spans

Up to 504 full Voice over IP (VoIP) channels
High level software environment to reduce time-to-market
Network options for T1/E1, Gigabit Ethernet and PICMG 2.16
Field proven voice processing resources including echo cancellation and tone generation/detection
More

 
CPCI-8205 CPCI Board for Voice Over IP Gateways

Up to 882 full Voice over IP (VoIP) channels
High level software environment to reduce time-to-market
Network options for DS3, Gigabit Ethernet and PICMG® 2.16
Field proven voice processing resources including echo cancellation and tone generation/detection
More

 
CPCI-8220/8221 Packet Voice Processing Blade

TMS320C6415 DSP array providing over 500 channels of AMR voice coding
High performance PowerPC® processor for control and management
Network interfaces for DS3, Gigabit Ethernet and PICMG 2.16
Open telecom framework software
More

 
CPX8216 CPCI 8-slot Platform

Dual 8-slot backplane (CPX8216 models) or  backplane with H.110 bus to all I/O slots (CPX8216T models) for high availability designs
A PowerPC® or Intel® Pentium® system controller CPU option allows the choice of the right processor for the application
Three 400W hot-swappable AC or DC power supply fan units provide N+1 redundancy
Front access service and installation of CompactPCI® boards, drives, fans, and power supplies for easy access to active components
More

FACT-OR Voice Processing Software

Advanced voice processing software environment
Extensive call processing functions for transcoding and service applications
Supports 3G CDMA/UMTS wireless and packet network voice standards
Open resource model and developers kit to modify or create new resources/algorithms
More

MATXM-C2-410-B MicroATX Motherboard

Unique midplane
PoweredUSB ports
512MB to 8GB DDR3
LVDS and HDMI displays
More

Centellis 500 MicroTCA Platform

Low profile, lightweight, solidly constructed injection molded plastic table-top or shelf placement chassis is easily transportable
Three (3) available AMC midsize expansion payload slots for application customization
Best-in-class MicroTCA Carrier Hub (MCH) and Intel Core 2 Duo processor AMC (PrAMC-7211)
Dynamic cooling for low noise enterprise deployment
More

Centellis 1000 MicroTCA System Platform

11-slot MicroTCA shelf provides scalable, embedded communications computing system
19 in. (483 mm) wide, 7 in. (178 mm) high, 9.3 in. (237 mm) deep shelf with front-only I/O and 23 in. rack mount option
600 watt AC or -48 VDC power entry modules support full complement of AdvancedMCs
Redundant DC power entry modules, hot-swappable AdvancedMCs, and an easy-to-service design
More

MCH-1011/1021 MicroTCA Carrier Hub Module

Full-size module designed to fit into MCH slot of MicroTCA platforms
SpiderWareM3 platform management software
Layer 2 unmanaged (or externally managed) Gigabit Ethernet switching to each of 12 payload slots
Two Gigabit Ethernet fabric expansion/uplink RJ-45 face plate connections
More

 
MCH-1010/1020 MicroTCA Carrier Hub Module

Full-size module designed to fit into MCH slot of MicroTCA™ platforms
Layer 2 unmanaged Gigabit Ethernet switching to each of 12 payload slots with front panel uplinks for external connections
Optional PCI Express switching with narrow or spread spectrum clock distribution for applications that require PCI Express capability
IPMI management functions
More

 
SpiderWareM3 Platform Management

Manage, Monitor and Maintain multiple MicroTCA platforms
Rapid Software Integration Designed for quick assimilation into other software applications
Quick Platform Set-up - Spend time on the important things
Asset Management - Identify all the platform and blade assets in a network
More

.

Pm8540 ProcessorPMC module with Freescale 8540 PowerQUICC III integrated processor

VITA32 ProcessorPMC
Freescale 8540 PowerQUICC III integrated processor
256 or 512MB Dual Data Rate DRAM
32MB Flash
More

 
Pm8560 ProcessorPMC module with up to 8 E1/T1/J1 interfaces

Processor PMC (VITA32-2003) with up to 8 software selectable E1/T1/J1 interfaces
Freescale Semiconductor
MPC8560 PowerQUICC III communication processor
Up to 512MB Double Data Rate SDRAM with ECC
More

PrPMC2750

PowerPC 750GX processor at up to 1.0 GHz in single-processor configuration
Highly integrated Marvell Discovery II system controller
Up to 1GB DDR SDRAM memory
64-bit/66 MHz PCI bus interface
More

PrPMC2800

High-performance symmetric multiprocessing (SMP) platform
MPC7447A PowerPC G4 processor running at up to 1.0 GHz in single or  dual processor configurations
128-bit wide AltiVec technology support
Highly integrated Marvell Discovery II system controller
More

PrPMC6001

MPC7448 PowerPC G4 processor running at up to 1.4 GHz
128-bit wide AltiVec technology support
Highly integrated Marvell Discovery III system controller
Up to 1GB DDR SDRAM memory
More

PrPMC800

MPC7410 PowerPC microprocessor
AltiVec technology
Latest high-performance PowerPlus III Architecture
2MB/1MB of L2 cache
More

PrPMC8150

MPC750FX microprocessor
High-performance PowerPlus III Architecture
Up to 512MB on-board ECC SDRAM
Up to 64MB on-board flash
More

PPCBug Firmware

Command-driven user-interactive software debugger. Debugging commands are available for loading and cuting user programs under complete operator control for system evaluation.
Command-driven diagnostic package for testing and troubleshooting.
Microprocessor, firmware, and hardware initialization routines. Products Running PPCBug Firmware:CPCI-6065 and the MVME5100.

More
 
PMCspan

The PMCspan board allows users to customize their exact I/O requirements with Emerson's VME based CPU modules designed around the PowerPlus Architecture.

More

 
PmPPC440 PowerPC based ProcessorPMC

AMCC PowerPC® 440GP processor running at 400MHz
Up to 133MHz PCI-X interface, backwards compatible with PCI 2.1
64MB, 128MB, 256MB, 512MB or 1GB DDR ECC SDRAM in SODIMM package
Dual 10/100BaseTX Ethernet interfaces with front bezel access
More