The Fyrite® Tech Analyzers offer service technicians the easiest and most affordable way to gain the benefits of electronic-combustion testing.
It used to be that gas and oil fired residential furnaces and appliances could be adequately serviced by conducting visual tests. But with today&s highly efficient equipment designed to comply with regulatory environmental and safety concerns “eye-balling the flame” is no longer a sufficient way to test.
Based on the winning technology platform of the Fyrite®Pro Analyzers the Fyrite®Tech offers service technicians an economical means to achieve greater precision than can be obtained with visual tests. From carbon Monoxide testing to oxygen and stack temperature measurement the Fyrite®Tech lets technicians instantly gather the precise measurements needed to ensure the safe compliant and efficient operation of residential fuel-burning appliances and furnaces.
Specifications:
Measured Values:
Flue Gas Oxygen Content 0.0 to 20.9% O2
Flue Gas Temperature 0 to 999°F (-18 to 537°C)
Ambient Temperature 32 to 104°F (0 to 40°C)
Flue Gas Carbon Monoxide Content 0 to 2000 PPM CO
Calculated Values:
Combustion Efficiency 0.1 to 99.9%
Flue Gas Carbon Dioxide Content 0.0 to a fuel dependent maximum (in%)
Flue Gas CO Air-Free Content 0 to 9999 ppm
Excess Air 0 to 400%
Selectable Fuels:
Natural Gas
Oil #2
Propane
Kerosene
Power: Four disposable ’AA’ alkaline batteries (included)
Battery Life: Up to 18 hours of continuous operation
Size: 7.5"H x 3.1"W x 2.1"D
Weight: 16 oz. with batteries
Warranty: 2 years including sensors
