0 - 25 bar
Ordering Information
To order a standard Pressure Gauge, quote model number
from table overleaf.
For non-standard models please consult our Technical Service.
Warning
These products are intended for use in industrial compressed air systems only. Do not
use these products where pressures and temperatures can exceed those listed under
‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial
applications, life-support systems, or other applications not within published
specifications, consult NORGREN MARTONAIR.
Through misuse, age, or malfunction, components used in fluid power systems can fail in
various modes. The system designer is warned to consider the failure modes of all
component parts used in fluid power systems and to provide adequate safeguards to
prevent personal injury or damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional
manual if protection against a failure mode cannot be adequately provided.
System designers and end users are cautioned to review specific warnings found in
instruction sheets packed and shipped with these products.
塑料或者不锈钢壳体
0 ... 1,6 40 背面中心 R1/8 18-013-991
0 ... 4 40 背面中心 R1/8 18-013-990
0 ... 10 40 背面中心 R1/8 18-013-989
0 ... 25 40 背面中心 R1/8 18-013-908
0 ... 1,6 50 背面中心 R1/8 18-013-010
0 ... 4 50 背面中心 R1/8 18-013-011
0 ... 6 50 背面中心 R1/8 18-013-012
0 ... 10 50 背面中心 R1/8 18-013-013
0 ... 25 50 背面中心 R1/8 18-013-014
0 ... 10 63 背面中心 R1/8 18-013-856
0 ... 16 63 背面中心 R1/8 18-013-855
0 ... 6 50 C/B 面板安装 G1/8A 18-013-858
0 ... 10 50 C/B 面板安装 G1/8A 18-013-857
0 ... 10 63 C/B 面板安装 G1/4A 18-013-852
0 ... 16 63 C/B 面板安装 G1/4A 18-013-851
0 ... 1,6 50 底部 R1/8 18-013-024
0 ... 4 50 底部 R1/8 18-013-025
0 ... 6 50 底部 R1/8 18-013-026
0 ... 10 50 底部 R1/8 18-013-027
0 ... 25 50 底部 R1/8 18-013-028
0 ... 10 63 底部 G1/4A 18-013-854
0 ... 16 63 底部 G1/4A 18-013-853
免责声明：以上所展示的[18-013-204 norgren压力表]信息由会员[上海突越机械设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
