Zy6058漏电起痕试验机
Tracking testing machine
漏电起痕试验机采用矩形铂电，两对试样的作用力分别为1.0N±0.05N.施加电压在100～600V（48～60Hz）之间可调，短路电流在1.0±0.1A时，电压下降应不超过10%，当试验回路中，短路漏电电流等于或大于0. 时，时间维持2秒钟，继电器动作，切断电流，指示试品不合格。滴液装置时间常数可调，控制滴液量大小44～50滴/cm3和滴液时间间隔30±5秒。
Tracking tester adopts rectangle platinum electrode, the force of specimen were 1.0 between N + / - 0.05 n.
imposed in 100 ~ 600 v voltage adjustable between (48 ~ 60 hz), short circuit current in 1.0 + / - 0.1 A,
voltage dro should be no more than 10%, when the test loop, the short circuit when the leakage current is
equal to or greater than 0.5 time keep 2 seconds, relay action, to cut off the current, the sample (s)
indicating not qualified. Time constant drip device is adjustable, accurate control fluid volume size 44 ~ 50
drops/cm3 and drops the time interval of 30 + / - 5 seconds.
符合GB/T4207试验标准。In line with the GB/T4207 test standard.
一、电：截面积为2mm×5mm两个矩形铂电。一端边缘为30°斜面。
二、表面作用力：1.0±0.05N
三、试验电压电压：100~600V
四、zui大试验电流：3A
五、两电距离：4.0mm
六、滴液装置：滴液时间间隔可任意设定
七、试验箱容积：0.5M3 ，深x宽x高：60 95x 90cm
八、外形尺寸：深x宽x高：61x 120 105cm
九、外箱材质：静电烤漆和镜面不锈钢。根据客户要求和业务谈定情况而选定
A, electrode: two cross-sectional area is 2 mm x 5 mm rectangular platinum electrode. Side edge to 30 °
incline.
Second, the surface forces: 1.0 + / - 0.05 N
3, test voltage, voltage: 100 ~ 600 v
Four, the biggest test current: 3 a
Five, two electrode distance: 4.0 mm
Six, drip device: drip time interval can be set freely
Seven, the test chamber volume: 0.5 M3, deep x width x height: 60 x 95 x 95 cm
Eight, overall dimensions: deep x width x height: 61 x 120 x 105 cm
Nine, carton material: electrostatic painting and mirror stainless steel. According to customer requirements
and business conditions and the selected my briefcase
本页产品地址：http://www.geilan.com/sell/show-4371642.html
免责声明：以上所展示的[ZY6058 漏电起痕试验机]信息由会员[东莞中诺台湾质检仪器设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
