ZY6039D可程式卧式插拔力
Programmable horizontal insertion force
本试验机用于检测各种连接器的插入力和拔出力。具有连续插拔功能；可任意设定插拔次数，即到达设定次数后自动停机；插入部分有防呆功能，可避免人为损坏传感器及连接器。传动机构采用无噪齿轮，运行匀速，无噪音，夹具是夹具，适用于不同的连接器。也可作连接器插拔寿命试验，整个设定功能都可在程序内完成。
This machine is applied to the detection of various connector insertion force and drawing output. With
continuous insertion functions; Can be set arbitrary number of plug, namely to set number of times after
automatic stop; Insert some fool proof function, can avoid man-made damage to the sensor and the connector.
Transmission mechanism adopts gear noise, and at a constant speed operation, no noise, clamp is universal,
suitable for different connector. Also can make the connector plug life test, the whole set function can be
made within the program.
一、控制系统：触摸屏 PLC，中文界面。
二、驱动部分：采用步进电机。
三、触控屏即时显示操作界面。
四、测试条件均由触摸屏输入并自动存储。
五、具有点动、手动、自动等多种操作模式，速度可自动调整。
六、试验荷重：50Kg。单位切换：Kgf，Nf，Lbf。
七、测试行程：0～60mm (不含夹具)。
八、测试速度：5~30次/min 可调。
Control system: PLC touch screen, Chinese interface.
Second, the drive part: adopt stepper motor.
Three, touch screen real-time display interface.
Four, test conditions are input by the touch screen and automatic storage.
Five, has some dynamic, manual and automatic operation mode, the speed can be adjusted automatically.
Six, test load: 50 kg. Unit switch: Kgf, Nf, Lbf.
Seven, test trip: 0 ~ 60 mm (excluding jig).
Eight, the test speed: 5 ~ 30 times/min is adjustable.
本页产品地址：http://www.geilan.com/sell/show-4366976.html
免责声明：以上所展示的[ZY6039D 可程式卧式插拔力]信息由会员[东莞中诺台湾质检仪器设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
