ZY6505灭火器振撞试验机测试仪装置
Fire extinguisher vibration tester tester device
1、型号：ZY6505Model: ZY6505
2、符合标准:Conform to the standard:
GB4351.1-2005《手提式灭火器 第1部分结构和性能》
GB4351.1-2005 portable fire extinguisher Part 1, structure and performance,
3、适用范围:Scope of application:
适用于1~8kg手提式灭火器的振撞试验
Suitable for 1 ~ 8 kg portable fire extinguisher of vibration test
4、主要性能参数：The main performance parameters:
1、整机主要由试验台，滑轮，钢丝绳、气缸、电磁阀、试件夹具、试验杯、电气控制系统等组成
2、跌落高度可调：将钢丝绳固定在试件夹具上，通过滑轮与气缸相连，调整钢丝绳的长度，即可调整跌落高度。
3、设计合理、操作简单：通过气动元件，电磁阀控制气缸拉动钢丝绳从而完成灭火器升起，跌落时，气缸快速伸出，钢丝绳
变松时即可完成一次跌落。
4、振撞次数可设定：采用进口气动元件，气缸往复运动从而完成振撞性能试验；系统可设定振撞频率、振撞次数。
5、zui大载重：zui大负荷50kg
6、振撞频率范围：0-1Hｚ（1次/秒）
7、进气压力：0.1～0.2 Mpa
8、振撞次数：0~999次可设定，到达设定次数自动停止。
9、供电电源：AC220V 50HZ 0.5kw
10、外形尺寸：长×宽×高（单位mm）=1000×500×1130
1, the machine is mainly composed of test-bed, pulley, wire rope, cylinder, solenoid valve, jig, test
specimens cup, electric control system, etc
2, dro height adjustable: wire rope fixed on the specimen clamp, through the pulley connected to the
cylinder, adjust the length of the wire rope, can adjust the dro height.
3, reasonable design, simple operation, through the pneumatic components, solenoid valve control cylinder pull
the rope to complete the fire extinguisher rises, falls, cylinder out quickly, can complete a dro wire rope
loose.
4, collision frequency of vibration can be set: imported pneumatic components, cylinder reciprocating movement
to complete against performance of vibration test; System can be set vibration frequency, vibration frequency.
5, maximum load, maximum load 50 kg
6, collision frequency range: 0-1 hz (1 / s)
7, inlet pressure: 0.1 ~ 0.2 Mpa
8, the vibration to hit number: 0 ~ 999 times can be set, to set the number of automatic stop.
9, the power supply: AC220V 50 hz 0.5 kw
10, appearance size: length x width x height (mm) = 1000 * 500 * 500
本页产品地址：http://www.geilan.com/sell/show-4361436.html
免责声明：以上所展示的[ZY6505 灭火器振撞试验机测试仪装置]信息由会员[东莞中诺台湾质检仪器设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
