ZY6239防火涂料燃烧试验机（大板法）
Burning fire retardant coating machine (large plate method)
1、适用范围：Scope of application:
在规定条件下，测试涂覆于可燃基材表面的饰面型防火涂料的耐燃特性的试验方法，也适用于饰面型防火涂料耐燃时间的测定
Under prescribed conditions, the test coating on substrate surface veneer type flame retardant properties of
fire retardant coating test method, can also be applied to determination of veneer type fire resistant time of
fire retardant coating
2、符合标准：Conform to the standard:
GB/T 12441-2005(附录A)。
3、 主要参数：The main parameters:
a) 测试工位：1工位
b) 温度均匀度：±2.5℃
c) 试样尺寸：L900*W900厚度为5mm,表面平整光滑。
d) 温控系统：数显温控表，可同时记录多组数据。
e) 热电偶：外径不大于3mm；丝径0.5 mm，精度不低于Ⅱ级，量程1300℃。
f) 计时器误差不大于1s/h。
g) 自动报警：试样背火面五路热电偶测温，温度达220℃时自动报警。
h) 气源：液化石油气或天然气。（客户自备）
i) 鼓风机风量（1～5）m3/min可调节。
j) 电源要求：AC220（±10%）V/50HZ
A) test station: 1 location
B) temperature uniformity: plus or minus 2.5 ℃
C) the sample size: L900 * W900 thickness is 5 mm, surface level off is smooth.
D) temperature control system, digital display temperature control table, but at the same time record multiple
sets of data.
E) thermocouple: outer diameter is not more than 3 mm; Wire diameter 0.5 mm, the accuracy is not lower than Ⅱ
level, a range of 1300 ℃.
F) the timer error is not more than 1 s/h.
G) automatic alarm: sample back fire five road surface thermocouple temperature measurement, automatic alarm
when the temperature of 220 ℃.
H) source: liquefied petroleum gas or natural gas. () by advertisers
I) blower air (1 ~ 5) m3 / min can be adjusted.
J) power supply requirements: AC220 (plus or minus 10%) V / 50 hz
4、设备结构：Equipment structure:
本仪器结构由主控制箱、鼓风装置、燃烧支架、及燃烧喷灯四大部份组成。控制箱为可移动式。
Structure of the instrument by the main control box, drum wind device, support, and combustion burner of the
four most. Control box for the mobile.
5、组件、材质：Components, material:
a) 机箱尺寸：L820㎜×W820㎜×H1500㎜
b) 机架材质采用优质304不锈钢方通焊接而成，控制箱材质为(t=1.2mm)静电钢板，表面进行喷塑处理，更显光洁、美观。
c) 喷灯：SUS304材质，我公司自制。
A) case size: L820 ㎜ x W820 ㎜ x H1500 ㎜
B) frame using quality material 304 stainless steel rectangular tube welding and become, control box is made
of electrostatic steel plate (t = 1.2 mm), surface coating processing, more bright and clean and beautiful.
C) burner: SUS304 material, my company's homemade.
6、 控制系统：Control system:
a) 控制箱采用继电器控制系统，所有有电子原件均采用品牌，能更好地保证机器的工作性能及检测精度。
b) 温度采用进口智能P.I.D温控器（具有自动演算之功能）和PT100热电耦传感器及定时器。
C)设备具有下列安全保护装置：电源超载、 短路保护、控制回路过载保护、超高温保护。
A) control box adopts relay control system, all have electronic originals adopt domestic leading brand, can
better guarantee the working performance of machine and precision.
B) using imported intelligent temperature P.I.D thermostat (have the functions of automatic calculation) and
high precision PT100 thermocouple sensor and timer.
C) equipment has the following safety protection device: power overload, short circuit protection, control
circuit overload protection, ultra high temperature protection.
本页产品地址：http://www.geilan.com/sell/show-4360158.html
免责声明：以上所展示的[ ZY6239 防火涂料燃烧试验机（大板法）]信息由会员[东莞中诺台湾质检仪器设备有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
