7450,7451,7452 安规综合分析仪

Molded Male to Alligator Clip. For applying the hipot test voltage to the DUT.

Molded Female to Alligator Clip. It allows hipot test voltage to return to the tester.

LEMO Red to Alligator Clip. For applying ground bond test current to the DUT.

LEMO Black to Alligator Clip. It allows ground bond test current to return to the tester.

Molded Male, White, Both Ends. It is used to interconnect between Matrix Scanners and hipot tester.

LEMO Red to Spade Terminal. For applying ground bond test current to the DUT.

LEMO Black to Spade Terminal. It allows ground bond test current to return to the tester.

Molded Female, Black, to Ring Terminal. It allows hipot test voltage to return to the tester.

Molded Male, White, to Open End. It allows hipot test voltage output connect to the DUT.

25-pin D type, Male to Female. It is used to connect to Matrix Scanner .

It is used to link with GPIB communication Interface.

It is used to link with GPIB communication Interface.

Molded Male, White, to Ring Lug.

link between Hipot and Ground Bond.

9-pin D type, Male to Female, with Interlock Disable key Ground Bond Input Signal connect to Hipot Output Signal.

9-pin D type, Male to Female, with Interlock Disable key. For Safety link test.

ON/OFF Switch button on the Rod to initiate hipot output with Interlock Disable function.

A fixed tip 4-wire Ground Bond probe with a lemo connector. It allows easy contact with grounding points of the device under test.

For applying the hipot test voltage to the DUT.

Hipot testing only. 2 Wires to a line cord.

Hipot and ground bond testing. 2 Wires to a line cord.

Hipot testing only.Allows for safe and easy testing of items terminated in a line cord.

With Interlock Disable function.

With Interlock Disable function.