Condec PIN7000 / PIN7010 Condec PIN7000 / PIN7010便携式气动增压器/控制器

PIN7000/PIN7010气体增压泵可为您的压力系统提供更高的压力。在做压力校准时，一般我们采用15MPa的氮气瓶为检定系统提供气源，当我们需要高于15MPa的压力时，氮气瓶已不能满足我们的需要，PIN7000/PIN7010气体增压泵就是为满足这种高压校准的需要设计的，它包含一个自动的气压增压系统，把入口压力泵高10倍，可用任何洁净气体或氮气瓶作为气源，zui高可为检定系统提供70MPa的压力。

产品详情：

工作原理：气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体，输出气压可通过驱动气压无级调节。

　　多种气体驱动：压缩空气、液化氮气和管道氮气、水蒸气。

　　输出流量大：只需0.3-0.69MPa压缩空气驱动就可获得较大的输出流量。

　　自动保压：工作时，迅速往复工作，随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力，此时消耗能量很小，无热

气体增压泵

量产生，无零件运动。当压力平衡打破后，气动增压泵自动开始工作到下一个平衡。

　　材质优良：高压部分材质为不锈钢。高压柱塞材质为不锈钢，并采用双层密封。

　　维护简单：气动增压泵的零件及密封少，维护简单且成本低。相同系列泵的所有"O"型圈，维修包易损部件可相互替换，大大降低了维修成本。气动增压泵出厂前已加注润滑剂，工作时无需外部润滑。

　　保持液压无须消耗能量2、 具有防爆功能，无需电力或电线连接3、 自身安全4、 结构小巧，重量轻，不受天气变化影响5、 易实现自动控制6、 抗污染7、输出静态压力由驱动气压来调节8、 输出压力达80000PSI的压力9、 在满负载时非常容易进行启动、停止操作10、 易安装，操作

This easy-to-operate system provides fingertip control with the exclusive micro-metering valve for pressure adjustment and venting. Monitoring has never been easier with three gauges that account for regulated pressure, accumulated pressure, and output pressure. These units are completely equipped with quick-disconnect fittings and hoses for rapid input and output pressure.

These pressure intensifying systems were designed for custom use. The compact PIN7000 incorporates a portable configuration for on-the-go operation. The rugged PIN7010 is a rack-mount model, ideal for frequent in-house use.

Features

·         Internal precision pressure intensifier generates up to 10 times input pressure

·         Electronically controlled intensifier system

·         Precision regulator to adjust input pressure

·         Three gauges to monitor regulated pressure, accumulated pressure, and output pressure

·         Patented micro-metering valves for pressure adjustment and venting

·         Quick-disconnect fittings and hoses supplied for input and output pressure

·         Easy to operate, training can be accomplished in 10 minutes

·         Available in self-contained enclosure with carrying handles (PIN7000) or 19 inch rack-mount version (PIN7010)

Models

·         PIN7000

·         PIN7010 (19inch rack-mount version of PIN7000)

Extras

·         63258 - Additional operation and maintenance manual - +35.00

·         59533 - External portable pressure cylinder (83.3 cu ft, 3694 psi test pressure) with CGA -580 shutoff valve/internal rupture disc and carrying handle - +349.00

·         55280 - Additional test port (output) 4-1/2 ft. long hose with quick-disconnect (SST) plug on one end and 1/4 inch 37º female AN swivel pressure fitting on opposite end - +591.00

·         55360 - Additional fill port (input) 4 ft. long hose with CGA -580 male nipple on one end and 1/4 inch 37º female AN swivel pressure fitting on opposite end - +144.00

·         58478 - Pressure trap - +899.00