自动蒸馏试验仪

AD-6

   GB/T 6536

   ASTM D86, D850, D1078

  ISO 3405, IP123, JIS K2254

Model AD-6 automatically performs distillation test of petroleum products as well as narrow boiling range samples. Tanaka’s 6th generation model in the series has been developed as an eco-friendly automated distillation tester using a Peltier system which does cooling/heating of the condenser as well as cooling of the cylinder compartment.

AD-6型自动蒸馏试验仪是“田中科学机器制作株式会社”第六代产品，不仅保持和改善了原系列型号的操作简单、重复性好等特点，而且使用了内藏式半导体制冷器，使整个仪器结构合理紧凑。

AUTOMATIC MEASUREMNT

Test parameter for each sample type is programmed prior to tests. Typical sets of test parameters are programmed prior to tests and recalled before each test run. After setting the sample, just press the START key; the distillation proceeds automatically. The vapor temperature and the actual distillation curve are displayed on a real time bases. Finally, the test results are printed out by built-in printer, and if a PC is connected, the test results are transmitted to the PC(ADMgr) or LIMS.

只需要设定几个简单的试验参数，按下“STATRT”就可以自动进行试验。试验过程达到了全自动化，大液晶显示屏能清晰地显示出馏程曲线和试验数据，试验结果可打印输出，或通过联网的计算机接收后，汇总分析。

FULLY SELF-CONTAINED DESIGN

All the necessary electronics and mechanics are contained in one casing for ease of use and higher reliability. Smallest footprint (as of 2002) fits on a lab bench easily.

仪器采用整体独立设计，集成了控制电路和机械机构。测试部分可靠而高效。体积小巧，可放置在试验台上。

ADVANCED FIRE CONTAINMENTS SYSTEM

Mechanical shutter with N2 gas injection (standard, N2 gas supply required) helps controlling fire, should the sample catches fire.

Note: Although AD-6 is equipped with a fire containment system, it is essential that the AD-6 be attended and other means of putting out fire be available at all time during a test.

仪器需要外接氮气保护。一旦发生火警，仪器可自动关闭并灭火。

注意：即使AD-6有着可靠的安全保护措施，在试验过程中，按试验规范，必须有人员在现场监护，以免意外发生。

TANAKAAutomated Distillation Tester Model: AD-6

CONFORMING STANDARDS: （适用标准）

ISO 3405, ASTM D86, IP123 for distillation test of petroleum products. (groups 1,2,3,4)

ASTM D850 for distillation test of industrial aromatic hydrocarbons (with an optional accessories) ASTM D1078 for distillation test of volatile organic liquids (with an optional accessories)

仪器适用于ASTM D86规定的1～4类油品的试验

配合不同的附件也可用于ASTMD850、D1078规定的苯类蒸馏试验。

VAPOR TEMPERATURE MEASURMENT: （温度控制）

Selectable from 0 oC to 300oC/400 oC (fuel oil) or 0 oC to 200oC/400 oC (ASTM D850, D1078) by PT-100 ±0.1 oC accuracy

蒸馏范围：0-300/400℃（油类） ； 0-200/400℃（ASTM D850, D1078)

控温精度：PT-100 铂电阻。±0.1 ℃

MENISCUS DETECTION: （馏出量控制）

By photoelectric devices with pulse motor 光电检测的液面跟踪系统

DISTILLATION RATE: 馏出速度

Selectable form 2.0 to 9.0ml/min with 0.5 increment 2～9ml/分,可按0.5ml为单位选择

DISPLAY: （显示）

Monochrome LCD (120mm x 90mm) Distillation curve and other test parameters, status, and trouble message displayed

单色大显示屏（120mm x 90mm）可显示大量信息，包括试验设定，试验过程，试验结果，描绘蒸馏曲线和显示出错信息。

CONDENSER TUBE:

Brass tube (standard) or stainless steel tube (option) Controlled at 0 to 70 oC by Peltier elements

全不锈钢制冷凝管温度范围: 温度控制在0～70℃

RECEIVER ROOM: （接受室）

Controlled at 10 to 70 oC by Peltier elements 温度控制范围 10-70℃

SAFETY FEATURES: （安全防护）

Heater shuts down at the upper end of the scale (200/300/400oC). Upon detecting fire by thermofuse, warning buzzer beeps, heater shuts down, and fire containment system activates. The fire containment system consists of a mechanical shutter and N2 gas injector.

加热过程一旦超出试验的限定范围(200/300/400℃)，仪器能够自动及时关闭加热炉并警报提示用户。一旦发生火警意外。仪器也能够在外接氮气保护时。自动进行灭火操作。

ERROR MESSAGES: （出错警示）

In case of detecting an error or equipment abnormality, the corresponding error message is displayed and the buzzer beeps. PRINTER: Built-in, thermal type

发生异常情况时，报警器鸣叫，显示屏上显示出相关信息，并能够打印输出。

COMPUTER OUTPUT: （计算机联机）

RS-232C (9P), 1 channel  RS-232C标准接口 1

UTILITY REQUIREMENTS: （电源/氮气保护）

100, 120, 220 or  240VAC, 1.5kW 50/60Hz,

External N2 gas supply (for fire containment system) 外接氮气保护 （自动灭火系统）

OPERATING TEMPERATURE:（环境要求）

10 ℃ to 30℃

DIMENSION & WEIGHT: （体积/重量）

400mmW x 520mmD x 710mmH, 55kg

ORDERING INFORMATION: （订购要求）

STANDARD ACCESSORIES: （标准附件）

1.Distillation Flask, 125ml 蒸馏烧瓶125ml	1 pc
2.Graduated Cylinder Assy, 100ml 接收瓶100ml	1 pc
3.Flask Support Board, 38mm ID 烧瓶支板38mm	1 pc
4.Flask Support Board, 50mm ID 烧瓶支板50mm	1 pc
5.Temperature Sensor for Fuel Oils 温度传感器（燃料油专用）	1 pc
6.Temperature Sensor Centering Device  硅橡胶塞 No.3	1 pc
7.Silicon Stopper for Flask (vapor tube)  硅橡胶塞 No.0A	1 pc
8.Spare Thermofuse 温度保险丝	3 pcs
9.AC Power Cord, 3.0m (or 2.5m (>AC200V)     电源线 3m (	1 pc
10.Instruction and Maintenance Manual 说明书+维修保养手册	1 copy

OPTIONAL ACCESSORIES: （推荐附件）

1     Temperature Sensor for ASTM D850, D1078 （ASTM D850, D1078温度检测传感器）

2     Flask for ASTM D850, D1078, 200ml （ASTM D850, D1078蒸馏烧瓶）

3     Silicone Stopper No.6 for Temperature Sensor for 200ml Flask（干点）硅橡胶塞 No.6

4     Flask Support Board for D850, 25mm ID烧瓶支板25mm

5     Flask Support Board for D1078, 32mm ID烧瓶支板32mm

6     Flask for 10% Distillation Residue, 250ml （10%馏分试验烧瓶）

7     Cylinder for 10% Distillation Residue, 200ml （10%馏分试验接收瓶）

8     Dry Point Sensor with Centering Device for 125ml Flask干点检测传感器

9     Dry Point Sensor with Centering Device for 200ml Flask干点检测传感器

10    Barometric Pressure Sensor气压检测传感器

11    Stainless Steel Condenser Tube for corrosive samples (Factory Option) 不锈钢冷凝管

12    ADMgr Kit(communication software for WindowsXP/Vista, converters and cables) 管理软件（支持WindowsXP/Vista，包括联机线和转换接头）

.